Academic history

Full Professor, academic & research staff-member at Mechanical & Manufacturing engineering at SUPMECA/Paris

Researcher staff, CNAM-Paris (1993-2002) & CEMEF – EMPS, Sophia Antipolice-Nice, 1991-1992

B.Sc., M.Sc. and PhD (Dr es Science) in Mechanical engineering (1982), (OSU-USA), (Bosphorous University/ Istanbul)

B.Sc., M.Sc. and PhD in materials science and manufacturing engineering (1991), CNAM - Arts et Métiers/Paris

Habilitation (HDR) in mechanical and materials science engineering (1997), University Pierre & Marie Curie, Paris VI

Docteur HONORIS CAUSA de l’Université de Technologie Chimique et de Métallurgie, Sofia - Bulgaria

Research Areas

Topic-1 : Manufacturing Techniques of new materials (basically composites - hybrid)

Topic-2  : Static &Dynamic behaviour and optimisation of materials (Experimental & FEM – Utilisation and design of composites based metallic & non-metallic, powder metallurgy, energetic materials aeronautical applications

Topic-3 : Processing of new composites, Sintering techniques, Sinter –Forging, thixoforming, etc.

Professional Development Activities

Vice-Editor of JAMME (International Journal of Achievement in Materials and Manufacturing Engineering)

Vice president, steering committee of AMPT (Advanced Materials Processing technologies,) and regional editor of JAMPT

Volume editor for Volume 6 : Welding & Bonding Technologies (Major reference Work (MRW) within Materials Processing (Prof. S. Hashmi, general editor of MRW-Elsevier

Volume Editor : Composites, Volume 11 : (Elsevier Science)-England, Reference Module in Mater. Science & Materials

Volume Editor for Volume 11 : Nano technology in production and application of renewable and sustainable materials, (Elsevier Science)-England, Reference Module in Materials Science and Materials Engineering

European-Regional Editor for AMPT Journal (Advanced Materials and Processing technologies), Taylor & Francis, USA

Inventions, Editorial Board & Guest Editor : Novel Composite Materials from Recycled Constituent Materials

Coatings, Guest Editor : Research Advances in Microstructure and Surface Roughness of Cutting Metal Surface with LASER, EDM, and Water JET Cutters

Polymers, Editorial Board & Guest Editor  : Additive Manufacturing of Bio and Synthetic Polymers

Polymers, Guest Editor  : Recycling of Bio and Synthetic Polymer Based Materials

Applied Sciences, Guest Editor : Selected Papers from MMSE 2021 Co-Chair

Applied Sciences, Guest Editor : Selected Papers from ICPEM 2020, Co-Chair

Metals, Editorial Board & Guest Editor  : Recycled Constituent Composites

Publications and Advised PhD & MSc thesis

More than 200 publications in the international journals and international conferences

• H-index : 34 (Source : Google Scholar, 2024)
• Citation number : 4044 (Source : Google Scholar) with more than 200 publications 
• i10-index : 102 (Source : Google Scholar, 2024)

Adviser or co-adviser for graduate and undergraduate students

• Advised & co-advised theses : 36 PhD, more than 120 MSc (Paris-FR, UTCM-Sofia-BG, UNICAMP-Campinas –BR, Ankara/TR, and Kuala Lumpur/Malesia)
• Co-advised going-on theses : 1 PhD (France)

Visiting Professor

- Nanyang Technology University, Singapore by Ming Jen TAN, 2012

- Xi’an Northwestern Technical University, Aeronautical Engineering, by Xue Hongquian, 2016

- University of Campinas, UNICAMP-Brazil with my convention from 2013 –up to end of 2023 for the aeronautic application projects and teaching in composites and their manufacturing techniques (5 months /year)

Divers

Silesian University Prix pour "FREDERIK STAUB Golden Medal-2009” By Academy of WAMME, « World Academy of Science » -Poland, materials science section,

William Johnson International Gold Medal -2014, AMPT academic association

2 National patents (French-1998, Impact Tensile Test for thin sheets, Device & test method, ARCELOR-FRANCE) and Brazil porous composite structures (UNICAMP-Campinas-SP/BRAZIL)

PUBLICATIONS : 2016-2021

1. Emin Bayraktar, F. Gatamorta, H. Enginsoy, J. Polis, I. Miskioglu. New Design of Composites from Fresh Scraps of Niobium for Tribological Applications Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.35-43, 2021, ⟨10.1007/978-3-030-59868-6_6⟩
2. H. Enginsoy, Emin Bayraktar, I. Miskioglu, F. Gatamorta, D. Katundi.Design of Copper and γ-Alumina Reinforced Recycled Aluminium Matrix Composites through Sintering + Forging, Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.73-80, 2021, ⟨10.1007/978-3-030-59868-6_11⟩
3. F. Gatamorta, H. Enginsoy, Emin Bayraktar, I. Miskioglu, D. Katundi. Design of Recycled Alumix-123 Based Composites Reinforced with γ-Al2O3 through Combined Method ; Sinter + Forging Mechanics of Composite, Hybrid and Multifunctional Materials Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.9-17, 2021, ⟨10.1007/978-3-030-59868-6_3⟩
4. H. Enginsoy, F. Gatamorta, Emin Bayraktar, I. Miskioglu, A. Larbi. Design of Copper and Silicon Carbide (SiC) Reinforced Recycled Aluminium Matrix Composites Through Sintering + Forging, Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.45-52, 2021, ⟨10.1007/978-3-030-59868-6_7⟩
5. Emin Bayraktar, D. Katundi, F. Gatamorta, I. Miskioglu, H. Murat Enginsoy. Design of Recycled Thin Sheet “Ti-Al” Based Composites Reinforced with AA1050, Boron, TiB2, TiC, and B4C Through Hot-Forged Bonding, Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.65-71, 2021, ⟨10.1007/978-3-030-59868-6_10⟩
6. R. Moraes, J. Paschoal, Emin Bayraktar, R. Silva, R. Costa et al. Study of a Semisolid Processing Route for Producing an AlSiMg0.5Mn Matrix Syntactic Foam via Thixoinfiltration of Fly Ash Micro Balloons Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.107-113, 2021, ⟨10.1007/978-3-030-59868-6_16⟩
7. H. Enginsoy, Emin Bayraktar, I. Miskioglu, D. Katundi. Manufacturing of “Ni-Ti” Based Composites from Fresh Scrap Thin Sheets Reinforced with Nb and TiB2 Through Hot-Forged Bonding : Sandwich Structures
8. Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.53-59, 2021, ⟨10.1007/978-3-030-59868-6_8⟩
9. L. Mihlyuzova, H. Enginsoy, D. Dontchev, Emin Bayraktar. Tailored Behaviour of Scrap Copper Matrix Composites Reinforced with Zinc and Aluminium : Low Cost Shape Memory Structures, Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.27-33, 2021, ⟨10.1007/978-3-030-59868-6_5⟩
10. Ozgur Aslan, Emin Bayraktar. Analytical Solutions of Model Problems for Large-Deformation Micromorphic Approach to Gradient Plasticity, Applied Sciences, MDPI, 2021, ⟨10.3390/app11052361⟩
11. Fathi Masoud, S. Sapuan, Mohd Khairol Anuar Mohd Ariffin, Y. Nukman, Emin Bayraktar. Experimental Analysis of Heat-Affected Zone (HAZ) in Laser Cutting of Sugar Palm Fiber Reinforced Unsaturated Polyester Composites, Polymers, MDPI, 2021, 13 (5), pp.706. ⟨10.3390/polym13050706⟩
12. H. Murat Enginsoy, Emin Bayraktar, Dhurata Katundi, Ibrahim Miskioglu. Detailed investigation of TiN effect on hybrid intermetallic composites manufactured by combined sinter + forging method, Mechanics of Advanced Materials and Structures, Taylor & Francis, 2021, pp.1-12. ⟨10.1080/15376494.2021.1886380⟩
13. B. El Aoud, M. Boujelbene, A. Boudjemline, Emin Bayraktar, S. Ben Salem et al. Investigation of cut edge microstructure and surface roughness obtained by laser cutting of titanium alloy Ti-6Al-4V, Materials Today : Proceedings, Elsevier, 2021, ⟨10.1016/j.matpr.2020.12.756⟩
14. M. Boujelbene, B. El Aoud, Emin Bayraktar, I. Elbadawi, I. Chaudhry et al. Effect of cutting conditions on surface roughness of machined parts in CO2 laser cutting of pure titanium, Materials Today : Proceedings, Elsevier, 2021, ⟨10.1016/j.matpr.2020.12.179⟩
15. Ozgur Aslan, Emin Bayraktar. A Large-Deformation Gradient Damage Model for Single Crystals Based on Microdamage Theory, Applied Sciences, MDPI, 2020, 10 (24), pp.9142. ⟨10.3390/app10249142⟩
16. D. Katundi, I. Miskioglu, and E. Bayraktar, Design of Intermetallic Mg (Recycled Ti-Al) Based Composites Through Semi Powder Metallurgy Method, , https://doi.org/10.1007/978-3-030-30028-9_4, pp.27-34, 2020, ⟨10.1007/978-3-030-30028-9_4⟩
17. E. Bayraktar, I. Miskioglu, D. Katundi, and F. Gatamorta, Manufacturing of Recycled Aluminum Matrix Composites Reinforced of TiC/MoS2/Al2O3 Fiber Through Combined Method : Sintered + Forging, Springer, Chapter 3, pp. 15-25, 2019, https://doi.org/10.1007/978-3-030-30028-9_3, pp.15-25, 2020, ⟨10.1007/978-3-030-30028-9_3⟩
18. Emin Bayraktar, Tao Gao, Zhidan Sun, Hongqian Xue, Zhi Qin et al. Effect of Turning on the Surface Integrity and Fatigue Life of a TC11 Alloy in Very High Cycle Fatigue Regime, Metals, MDPI, 2020, 10 (11), pp.1507. ⟨10.3390/met10111507⟩
19. Sonia Ezeddini, Mohamed Boujelbene, Emin Bayraktar, Sahbi Ben Salem. Optimization of the Surface Roughness Parameters of Ti–Al Intermetallic Based Composite Machined by Wire Electrical Discharge Machining, Coatings, MDPI, 2020, 10 (9), pp.900. ⟨10.3390/coatings10090900⟩
20. A. Boudjemline, M. Boujelbene, Emin Bayraktar. Surface Quality of Ti-6Al-4V Titanium Alloy Parts Machined by Laser Cutting, Engineering technology and Applied science research , Dionisios Pylarinos, 2020, 10 (4), pp.6062-6067. ⟨10.48084/etasr.3719⟩
21. H.M. Enginsoy, Emin Bayraktar, D. Katundi, F. Gatamorta, I. Miskioglu. Comprehensive analysis and manufacture of recycled aluminum based hybrid metal matrix composites through the combined method ; sintering and sintering + forging. Composites Part B : Engineering, Elsevier, 2020, 194, pp.108040. ⟨10.1016/j.compositesb.2020.108040⟩
22. Fathi Masoud, S.M. Sapuan, Mohd Khairol Anuar Mohd Ariffin, Y. Nukman, Emin Bayraktar.
23. Cutting Processes of Natural Fiber-Reinforced Polymer Composites, Polymers, MDPI, 2020, 12 (6), pp.1332. ⟨10.3390/polym12061332⟩
24. Anheng Wang, Hongqian Xue, Emin Bayraktar, Yanli Yang, Shah Saud et al. Analysis and Control of Twist Defects of Aluminum Profiles with Large Z-Section in Roll Bending Process, Metals, MDPI, 2020, 10 (1), pp.31. ⟨10.3390/met10010031⟩
25. Artur Czupryński, Marcin Adamiak, Emin Bayraktar, Bernard Wyględacz. Comparison of tribological properties and structure of coatings produced in powder flame spraying process on grey cast iron, Welding Technology Review, 2020, 92 (3), pp.7-21. ⟨10.26628/wtr.v92i3.1102⟩
26. Alaeddin Burak Irez, Emin Bayraktar. Design of Epoxy Modified Recycled Rubber-Based Composites : Effects of Different Contents of Nano-Silica, Alumina and Graphene Nanoplatelets Modification on the Toughening Behavior, Gazi University, Journal of Science, 2020, 33 (1), pp.188-199. ⟨10.35378/gujs.585446⟩
27. Emin Bayraktar, Alaeddin Burak Irez, Ibrahim Miskioglu. Fracture Toughness Analysis of Epoxy-Recycled Rubber-Based Composite Reinforced with Graphene Nanoplatelets for Structural Applications in Automotive and Aeronautics, Polymers, MDPI, 2020, 12 (2), pp.448. ⟨10.3390/polym12020448⟩
28. F. Gatamorta, Dhurata Katundi, E. Bayraktar, L. M. P. Ferreira, and M. L. N. M. Melo, Magnetic Shape Memory Composite (MSMC) Design from Intermetallic Cu-NiTi-MnAl-Fe3O4 Alloy as an Alternative Replacement for Actuators, Springer, Chapter 7, pp. 47-53, 2019, https://doi.org/10.1007/978-3-030-30028-9_7,
29. A. Burak Irez, Emin Bayraktar Design of a Low-Cost Aircraft Structural Material Based on Epoxy : Recycled Rubber Composites Modified with Multifunctional Nano Particles, Mechanics of Composite and Multi-functional Materials, Volume 5,, pp.73-80, ⟨10.1007/978-3-030-30028-9_11⟩
30. Emin Bayraktar, Dhurata Katundi, Fábio Gatamorta, Ibrahim Miskioglu. Design of Hydroxyapatite/Magnetite (Hap/Fe3O4) Based Composites Reinforced with ZnO and MgO for Biomedical Applications, Biomedical Journal of Scientific and Technical Research, Vol. 21, Issue 2, pp. 15790-15797, 2019 https://doi.org/10.26717/BJSTR.2019.21.003585
31. E. Bayraktar, and M. L. N. M. Mel, Recycling of Aluminium-431 by High Energy Milling Reinforced with TiC-Mo-Cu for New Composites in Connection Applications, Chapter 6, pp.41-46, 2019, Springer,, https://doi.org/10.1007/978-3-030-30028-9_6, In press, ⟨10.1007/978-3-030-30028-9_6⟩
32. G. Katundi, D. Katundi, E. Bayraktar, and I. Miskioglu, Alternative Composite Design from Recycled Aluminum (AA7075) Chips for Knuckle Applications-II, Springer, Chapter 2, pp. 9-14, 2019, pp.9-14, ⟨10.1007/978-3-030-30028-9_2⟩
33. A. Burak Irez, Georges Zambelis, Emin Bayraktar. A New Design of Recycled Ethylene Propylene Diene Monomer Rubber Modified Epoxy Based Composites Reinforced with Alumina Fiber : Fracture Behavior and Damage Analyses. Materials, MDPI, 2019, 12 (17), pp.2729. ⟨10.3390/ma12172729⟩
34. Claudiney Mendonça, Patricia Capellato, Emin Bayraktar, Fábio Gatamorta, José Gomes et al. Recycling Chips of Stainless Steel Using a Full Factorial Design, Metals, MDPI, 2019, 9 (8), pp.842. ⟨10.3390/met9080842⟩
35. H. Murat. Enginsoy, F. Gatamorta, Emin Bayraktar, M.H. Robert, I. Miskioglu. Experimental and numerical study of Al-Nb2Al composites via associated procedure of powder metallurgy and Thixoforming, Composites Part B : Engineering, Elsevier, 2019, 162, pp.397-410. ⟨10.1016/j.compositesb.2018.12.138⟩
36. A. Burak Irez, Emin Bayraktar, Ibrahim Miskioglu. Flexural fatigue damage analyses of recycled rubber - modified epoxy-based composites reinforced with alumina fibres, Fatigue & Fracture of Engineering Materials & Structures, Wiley-Blackwell, 2019, volume 42, issue 4, pp. 959-971 https ://doi.org/10.1111/ffe.12964
37. Emin Bayraktar, Halil Enginsoy, Ali Kurşun. A Comprehensive Study on the Deformation Behavior of Hadfield Steel Sheets Subjected to the Drop Weight Test : Experimental Study and Finite Element Modeling, Metals, MDPI, 2018, 8 (9), ⟨10.3390/met8090734⟩
38. A. Burak Irez, Emin Bayraktar, I. Miskioglu, Recycled and devulcanized rubber modified epoxy-based composites reinforced with nano-magnetic iron oxide, Fe3O4, Composites Part B : Engineering, Elsevier, 2018, 148, pp.1-13. ⟨10.1016/j.compositesb.2018.04.047⟩
39. Emin Bayraktar, Fábio Gatamorta, Maria Helena Robert. METHOD FOR OBTAINNING METALLIC CELULAR MATERIALS, National Patent, Brazil, 2018 Patent n° : BR1020180118080.
40. A. Irez, I. Miskioglu, Emin Bayraktar, Design of Cost Effective Epoxy + Scrap Rubber Based Composites Reinforced with Titanium Dioxide and Alumina Fibers, Mechanics of Composite, Hybrid and multifunctional Materials, volume 5, pp.59-66, 2018 https://doi.org/10.1007/978-3-319-95510-0_7
41. M. Douiri, M. Boujelbene, Emin Bayraktar, S. Ben Salem, A Study of the Surface Integrity of Titanium Alloy Ti-6Al-4V in the Abrasive Water Jet Machining Process, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.221-228, 2018 https://doi.org/10.1007/978-3-319-95510-0_27
42. Rodolfo Leibholz, Henrique Leibholz, Emin Bayraktar, Maria Helena Robert. Investigation on Microstructure and Interfaces in Graded FE50007 / WC Composites Produced by Casting, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.321-329, 2018 https://doi.org/10.1007/978-3-319-95510-0_43
43. Sonia Ezeddini, Mohamed Boujelbene, Emin Bayraktar, Sahbi Ben Salem. Recycled Ti-17 Based Composite Design ; Optimization Process Parameters in Wire Cut Electrical Discharge Machining (WEDM), Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.109-125, 2018 https://doi.org/10.1007/978-3-319-95510-0_14
44. A. Irez, Emin Bayraktar, I. Miskioglu. Damping and Toughening Effect of the Reinforcements on the Epoxy Modified Recycled + Devulcanized Rubber Based Composites, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.147-158, 2018 https://doi.org/10.1007/978-3-319-95510-0_17
45. B. El Aoud, M. Boujelbene, Emin Bayraktar, S. Ben Salem, A. Boudjemline Experimental Comparison of the Microstructure and Surface Roughness in CO2 Laser Cutting of the Titanium Alloy Ti–6Al–4V and the Pure Titanium Ti, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.249-255, 2018 https://doi.org/10.1007/978-3-319-95510-0_31
46. A. Burak Irez, Ibrahim Miskioglu, Emin Bayraktar. Toughening Mechanisms on Recycled Rubber Modified Epoxy Based Composites Reinforced with Alumina Fibers, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.275-282, 2018 https://doi.org/10.1007/978-3-319-95510-0_34
47. S. Ezeddini, Emin Bayraktar, M. Boujelbene, S. Ben Salem. Optimization of Surface Integrity of Titanium-Aluminum Intermetallic Composite Machined by Wire EDM, Mechanics of Composite, Hybrid and multifunctional Materials, volume 5, pp.47-57, 2018 https://doi.org/10.1007/978-3-319-95510-0_6
48. B. El Aoud, M. Boujelbene, Emin Bayraktar, S. Ben Salem. Optimization of Kerf Quality During CO2 Laser Cutting of Titanium Alloy Sheet Ti-6Al-4V and Pure Titanium Ti, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.213-219, 2018 https://doi.org/10.1007/978-3-319-95510-0_26
49. L-M. Ferreira, Emin Bayraktar, I. Miskioglu, M-H. Robert. Design of Magnetic Aluminum (AA356) Composites (AMCs) Reinforced with Nano Fe3O4, and Recycled Nickel : Copper Particles, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.93-100, 2018 https://doi.org/10.1007/978-3-319-95510-0_12
50. L.-M. Ferreira, I. Miskioglu, Emin Bayraktar, D. Katundi. Reinforcement Effect of Nano Fe3O4 and Nb2Al on the Mechanical and Physical Properties of Cu-Al Based Composites, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.101-108, 2018 https://doi.org/10.1007/978-3-319-95510-0_13
51. A. Burak Irez, Emin Bayraktar, I. Miskioglu. Toughening Mechanism in Epoxy Resin Modified Recycled Rubber Based Composites Reinforced with Gamma-Alumina, Graphene and CNT, Mechanics of Composite, Hybrid and multifunctional Materials, volume 5, pp.31-39, 2018 https://doi.org/10.1007/978-3-319-95510-0_4
52. D. Katundi, A. Irez, Emin Bayraktar, I. Miskioglu. Alternative Composite Design from Recycled Aluminum Chips for Mechanical Pin-Joint (Knuckle) Applications, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.127-135, 2018 https://doi.org/10.1007/978-3-319-95510-0_15
53. A. Burak Irez, I. Miskioglu, Emin Bayraktar. Toughening Mechanisms on Recycled Rubber Modified Epoxy Based Composites Reinforced with Graphene Nanoplatelets, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.283-290, 2018 https://doi.org/10.1007/978-3-319-95510-0_35
54. Georges Zambelis, Emin Bayraktar, D. Katundi, I. Miskioglu. Manufacturing of Copper Based Composites Reinforced with Ceramics and Hard Intermetallics for Applications of Electric Motor Repair Parts, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.137-145, 2018 https://doi.org/10.1007/978-3-319-95510-0_16
55. A. Burak Irez, Emin Bayraktar, I. Miskioglu. Reinforcement of Recycled Rubber Based Composite with Nano-Silica and Graphene Hybrid Fillers, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, volume 5, pp.67-76, 2018 https://doi.org/10.1007/978-3-319-95510-0_8
56. Fabio Gatamorta, C. Mendonça, M. Junqueira, Emin Bayraktar, B. Andrade et al. Optimization of the High Energy Milling Process of Chips of a Stainless Steel Using the Response Surface Modeling, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.237-242, 2018 https://doi.org/10.1007/978-3-319-95510-0_29
57. Emin Bayraktar, L.-M.-P. Ferreira, I. Miskioglu, M.-H. Robert. New magnetic aluminum matrix composites (Al-Zn-Si) reinforced with nano magnetic Fe 3 O 4 for aeronautical applications, Advances in Materials and Processing Technologies, 2018, 4 (3), pp.358 - 369. ⟨10.1080/2374068X.2018.1432940⟩
58. A. Burak Irez, Emin Bayraktar, I. Miskioglu. Devulcanized Rubber Based Composite Design Reinforced with Nano Silica, Graphene Nano Platelets (GnPs) and Epoxy for “Aircraft Wing Spar” to Withstand Bending Moment, Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 5, pp.9-22, 2018 https://doi.org/10.1007/978-3-319-95510-0_2
59. A. Burak Irez, Emin Bayraktar, Ibrahim Miskioglu. Toughening Mechanisms of Devulcanized Rubber Modified Epoxy Based Composites Reinforced with Zirconia, Reference Module in Materials Science and Materials Engineering, Elsevier, 2018, ⟨10.1016/B978-0-12-803581-8.11329-3⟩
60. Diana Zaimova, Emin Bayraktar, Ibrahim Miskioglu. Multifunctional Energetic Structural Composites : Epoxy-Rubber Matrix with Nickel Aluminum Reinforcements, Reference Module in Materials Science and Materials Engineering, Elsevier, 2018, ⟨10.1016/B978-0-12-803581-8.09608-9⟩
61. A. Burak Irez, Emin Bayraktar, Ibrahim Miskioglu. A New Design of Epoxy Based Composites Reinforced With Devulcanized Rubber, Alumina Fiber and BN, Reference Module in Materials Science and Materials Engineering, Elsevier, 2018 10.1016/B978-0-12-803581-8.11328-1
62. H. Ali. Alhas, Emin Bayraktar. Manufacturing and Process Excellence by Embedding of Radio Frequency Identification (RFID) Tag in the Production of Composite Parts in Aeronautical Engineering, Reference Module in Materials Science and Materials Engineering, 2018 <10.1016/B978-0-12-803581-8.09609-0>
63. A. Burak Irez, Emin Bayraktar, Jenny Hay, Ibrahim Miskioglu. Scrap-Rubber Based Composites Reinforced with Boron and Alumina, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 1-9, 2017, DOI 10.1007/978-3-319-63408-1
64. S. Ezeddini, G. Zambelis, E. Bayraktar, I. Miskioglu, and D. Katundi Experimental Study of Laser Cutting Process of Titanium Aluminium (Ti-Al) Based Composites Designed Through Combined Method of Powder Metallurgy and Thixoforming, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 21-32, 2017, DOI 10.1007/978-3-319-63408-3,
65. A.B. Irez, I. Miskioglu, and E. Bayraktar Mechanical Characterization of Epoxy : Scrap Rubber Based Composites Reinforced with Nanoparticles, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 33-44, 2017, DOI 10.1007/978-3-319-63408-4,
66. A.B. Irez, I. Miskioglu, and E. Bayraktar Mechanical Characterization of Epoxy – Scrap Rubber Based Composites Reinforced with Nano Graphene, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 45-58, 2017, DOI 10.1007/978-3-319-63408-5
67. A.B. Irez, E. Bayraktar, and I. Miskioglu. Mechanical Characterization of Epoxy – Scrap Rubber Based Composites Reinforced with Alumina Fibres, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 59-70, 2017, DOI 10.1007/978-3-319-63408-6,
68. D. Katundi, L.P. Ferreira, E. Bayraktar, I. Miskioglu, and M.H. Robert. Design of Magnetic Aluminium (A356) Based Composites through Combined 2 Method of Sinter + Forging, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 89-100, 2017, DOI 10.1007/978-3-319-63408-9
69. F. Gatamorta, E. Bayraktar, I. Miskioglu, D. Katundi, and M.H. Robert Design of Low Composites from Recycled Copper + Aluminium Chips for Tribological Applications, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 101-110, 2017, DOI 10.1007/978-3-319-63408-10
70. Sonia Ezeddini, D. Katundi, Emin Bayraktar, and I. Miskioglu. Laser Cutting of the TiN +Al2O3 Reinforced Aluminium Matrix Composites through Semisolid Sintering, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 115-130, 2017, DOI 10.1007/978-3-319-63408-12
71. Sonia Ezeddini, Emin Bayraktar, I. Miskioglu, and D. Katundi. Optimization of Laser Cutting Parameters for Tailored Behaviour of Scrap (Ti6242 + Ti) Based Composites through Semisolid Sintering, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 131-142, 2017, DOI 10.1007/978-3-319-63408-13
72. B. El Aoud, M. Boujelbene, E. Bayraktar, S. Ben Salem, and I. Miskioglu. Studying Effect of CO2 Laser Cutting Parameters of Titanium Alloy on Heat Affected Zone and Kerf Width Using the Taguchi Method, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 143-150, 2017, DOI 10.1007/978-3-319-63408-14
73. M. Boujelbene, A. Alghamdi, I. Miraoui, Emin Bayraktar, M. Gazbar. Effects of the laser cutting parameters on the micro-hardness and on the heat affected zone of the mi-hardened steel, International Journal of Advanced and Applied Science, volume 4 (5), pp.19 - 25. 2017, ⟨10.21833/ijaas.2017.05.003⟩
74. A. Burak Irez, Emin Bayraktar, I. Miskioglu. Design and Mechanical-Physical Properties of Epoxy-Rubber Based Composites Reinforced with Nanoparticles, Procedia Engineering, Elsevier, 2017, 184, pp.486 - 496. ⟨10.1016/j.proeng.2017.04.119⟩
75. Emin Bayraktar, D. Katundi, L.-M. Ferreira, M.-H. Robert. Design and microstructural evolution, mechanical and physical properties of fine particles reinforced aluminum matrix composites
76. Advances in Materials and Processing Technologies, volume 2 (4), pp.566 – 577, 2016 ⟨10.1080/2374068X.2016.1247244⟩
77. Marina Ferraz Viana, Maria Helena Robert, Emin Bayraktar. Structure analysis of graded AA2011–Al2O3/NaAlSi3O8 composites produced by Thixoforming Advances in Materials and Processing Technologies, volume 3, pp.231-239. 2016, ⟨10.1080/2374068X.2016.1259803⟩
78. Emin Bayraktar, Lygia. Ferreira, Ibrahim Miskioglu, Maria Helena. Robert. Influence of nanoparticulate and fiber reinforcements on the wear response of multiferroic composites processed by powder metallurgy Advances in Materials and Processing Technologies, 2016, 3 (1), pp.23 – 32, 2016 ⟨10.1080/2374068X.2016.1247242⟩
79. Emin Bayraktar, Lygia Ferreira, Ibrahim Miskioglu, Maria Helena Robert. Design and physical properties of multifunctional structural composites reinforced with nanoparticles for aeronautical applications, Advances in Materials and Processing Technologies, 2016, 3 (1), pp.33 – 44, 2016 ⟨10.1080/2374068X.2016.1247243⟩
80. Rodolfo Leibholz, Maria Helena Robert, Henrique Leibholz, Emin Bayraktar. Development of Functionally Graded Nodular Cast Iron Reinforced with Recycled WC Particles
81. Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.241-249, 2016, ⟨10.1007/978-3-319-41766-0_29⟩
82. Lygia M.P. Ferreira, Ibrahim Miskioglu, Emin Bayraktar, and Dhurata Katundi. Mechanical and Tribological Properties of Scrap Rubber Based Composites Reinforced with Glass Fiber, Al and TiO2, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.1-8, 2016, ⟨10.1007/978-3-319-41766-0_29⟩
83. L.F.P. Ferreira, E. Bayraktar, M.H. Robert, and I. Miskioglu. Recycling of Scrap Aluminum (AA7075) Chips for Low Cost Composites, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.19-26, 2016, ⟨10.1007/978-3-319-41766-0_3⟩
84. D. Zaimova, L.-M.P. Ferreira, E. Bayraktar, and I. Miskioglu. Scrap Rubber Based Composites Reinforced with Ceramic Oxides and Silica, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.27-36, 2016, ⟨10.1007/978-3-319-41766-0_29⟩
85. L.M.P. Ferreira, I. Miskioglu, E. Bayraktar, and D. Katundi. Mechanical and Tribological Properties of Scrap Rubber Reinforced with Al2O3 Fiber, Aluminum and TiO2, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.37-44, 2016, ⟨10.1007/978-3-319-41766-0_29⟩
86. L.F.P. Ferreira, E. Bayraktar, I. Miskioglu, and D. Katundi. Design of Hybrid Composites from Scrap Aluminum Bronze Chips, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.131-138, 2016, ⟨10.1007/978-3-319-41766-0_15⟩
87. L.F.P. Ferreira, E. Bayraktar, M.H. Robert, and I. Miskioglu. Particles Reinforced Scrap Aluminum Based Composites by Combined Processing Sintering þ Thixoforging, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.145-152-, 2016, ⟨10.1007/978-3-319-41766-0_17⟩
88. L.F.P. Ferreira, E. Bayraktar, I. Miskioglu, and M.H. Robert. Recycle of Aluminum (A356) for Processing of New Composites Reinforced with Magnetic Nano Iron Oxide and Molybdenum, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.153-162, 2016, ⟨10.1007/978-3-319-41766-0_18⟩
89. A. Kurşun, L.F.P. Ferreira, E. Bayraktar, and I. Miskioglu. Design of Hybrid Composites from Scrap Aluminum Reinforced with (SiC+TiO2+Gr+Ti+B) Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.225-232, 2016, ⟨10.1007/978-3-319-41766-0_27⟩
90. L.F.P Ferreira, F. Gatamorta, E. Bayraktar, and M.H. Robert. Manufacturing of Low Cost Composites with Porous Structures from Scrap Aluminum (AA2014) Chips, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.233-240, 2016, ⟨10.1007/978-3-319-41766-0_28⟩
91. L.F.P. Ferreira, I. Miskioglu, E. Bayraktar, and M.H. Robert. Aluminum Matrix Composites Reinforced by Nano Fe3O4 Doped with TiO2 by Thermomechanical Process, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.251-260, 2016, ⟨10.1007/978-3-319-41766-0_30⟩
92. Emin Bayraktar, D. Zaimova, I. Miskioglu. Design and manufacturing of new elastomeric composites : Mechanical properties, chemical and physical analysis, Composites Part B : Engineering, Elsevier, volume 105, pp.203 – 210, 2016. ⟨10.1016/j.compositesb.2016.05.061⟩
93. Emin Bayraktar, Lygia M-P. Ferreira, Maria Helena Robert. Magnetic and electrical properties of aluminum matrix composite reinforced with magnetic nano iron oxide (Fe3O4), Advances in Materials and Processing Technologies, 2016, 2 (1), pp.165 - 173. ⟨10.1080/2374068X.2016.1164529⟩
94. Emin Bayraktar, A. Kurşun, M. Robert. Low cost manufacturing of aluminum-alumina composites, Advances in Materials and Processing Technologies, volume 1 (3-4), pp.515 – 528, 2016. ⟨10.1080/2374068X.2016.1143212⟩
95. Emin Bayraktar, Ali Kurşun, Halil Enginsoy. Experimental and numerical study of alumina reinforced aluminum matrix composites : Processing, microstructural aspects and properties, Composites Part B : Engineering, Elsevier, 2016, 90, pp.302 – 314, 2016 ⟨10.1016/j.compositesb.2016.01.006⟩
96. Imed Miraoui, Mohamed Boujelbene, Emin Bayraktar. Analysis of cut surface quality of sheet metals obtained by laser machining : thermal effects Advances in Materials and Processing Technologies, volume 1 (3-4), pp.633-642, 2016. ⟨10.1080/2374068X.2016.1147759⟩
97. Ali Kurşun, Mehmet Şenel, Halil M. Enginsoy, Emin Bayraktar. Effect of impact or shapes on the low velocity impact damage of sandwich composite plate : Experimental study and modelling, Composites Part B : Engineering, Elsevier, volume 86, pp.143 - 151. 2016 ⟨10.1016/j.compositesb.2015.09.032⟩