BAYRAKTAR Emin

Professeur des Universités

Tél. : 01 49 45 29 54
Mél : bayraktar@isae-supmeca.fr

Membre attaché au thème Tribologie et Matériaux
Établissement : ISAE-SUPMECA

Novel composites : recycled aluminium and rubber
Damage analyses
Sinter + Forging, Thixioforming

Academic history

Full Professor, academic & research staff-member at Mechanical & Manufacturing engineering at SUPMECA/Paris

Researcher staff, CNAM-Paris (1993-2002) & CEMEF – EMPS, Sophia Antipolice-Nice, 1991-1992

B.Sc., M.Sc. and PhD (Dr es Science) in Mechanical engineering (1982), (OSU-USA), (Bosphorous University/ Istanbul)

B.Sc., M.Sc. and PhD in materials science and manufacturing engineering (1991), CNAM - Arts et Métiers/Paris

Habilitation (HDR) in mechanical and materials science engineering (1997), University Pierre & Marie Curie, Paris VI

Docteur HONORIS CAUSA de l’Université de Technologie Chimique et de Métallurgie, Sofia - Bulgaria

Research Areas

Topic-1 : Manufacturing Techniques of new materials (basically composites - hybrid)

Topic-2  : Static &Dynamic behaviour and optimisation of materials (Experimental & FEM – Utilisation and design of composites based metallic & non-metallic, powder metallurgy, energetic materials aeronautical applications

Topic-3 : Processing of new composites, Sintering techniques, Sinter –Forging, thixoforming, etc.

Professional Development Activities

Vice-Editor of JAMME (International Journal of Achievement in Materials and Manufacturing Engineering)

Vice president, steering committee of AMPT (Advanced Materials Processing technologies,) and regional editor of JAMPT

Volume editor for Volume 6 : Welding & Bonding Technologies (Major reference Work (MRW) within Materials Processing (Prof. S. Hashmi, general editor of MRW-Elsevier

Volume Editor : Composites, Volume 11 : (Elsevier Science)-England, Reference Module in Mater. Science & Materials

Volume Editor for Volume 11 : Nano technology in production and application of renewable and sustainable materials, (Elsevier Science)-England, Reference Module in Materials Science and Materials Engineering

European-Regional Editor for AMPT Journal (Advanced Materials and Processing technologies), Taylor & Francis, USA

Inventions, Editorial Board & Guest Editor : Novel Composite Materials from Recycled Constituent Materials

Coatings, Guest Editor : Research Advances in Microstructure and Surface Roughness of Cutting Metal Surface with LASER, EDM, and Water JET Cutters

Polymers, Editorial Board & Guest Editor  : Additive Manufacturing of Bio and Synthetic Polymers

Polymers, Guest Editor  : Recycling of Bio and Synthetic Polymer Based Materials

Applied Sciences, Guest Editor : Selected Papers from MMSE 2021 Co-Chair

Applied Sciences, Guest Editor : Selected Papers from ICPEM 2020, Co-Chair

Metals, Editorial Board & Guest Editor  : Recycled Constituent Composites

Publications and Advised PhD & MSc thesis

More than 200 publications in the international journals and international conferences

H-index : 21 (Source : SCOPUS & ECI & SCI-2019)

Citation number : 1475 (Source : SCOPUS & ECI & SCI-2019) with more than 200 publications & 90 research reports

Adviser or co-adviser for graduate and undergraduate students

(Presented : Advised & co-advised theses : 32 PhD, more than 120 MSc), Actually 5 PhD continue (Paris-FR, UTCM-Sofia-BG, UNICAMP-Campinas –BR, Ankara/TR, and Kuala Lumpur/Malesia)

Visiting Professor

- Nanyang Technology University, Singapore by Ming Jen TAN, 2012

- Xi’an Northwestern Technical University, Aeronautical Engineering, by Xue Hongquian, 2016

- University of Campinas, UNICAMP-Brazil with my convention from 2013 –up to end of 2023 for the aeronautic application projects and teaching in composites and their manufacturing techniques (5 months /year)

Divers

Silesian University Prix pour "FREDERIK STAUB Golden Medal-2009” By Academy of WAMME, « World Academy of Science » -Poland, materials science section,

William Johnson International Gold Medal -2014, AMPT academic association

2 National patents (French-1998, Impact Tensile Test for thin sheets, Device & test method, ARCELOR-FRANCE) and Brazil porous composite structures (UNICAMP-Campinas-SP/BRAZIL)

PUBLICATIONS : 2016-2021

  1. Emin BayraktarF. GatamortaH. EnginsoyJ. PolisI. MiskiogluNew Design of Composites from Fresh Scraps of Niobium for Tribological Applications Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.35-43, 2021, ⟨10.1007/978-3-030-59868-6_6⟩
  2. H. EnginsoyEmin BayraktarI. MiskiogluF. GatamortaD. Katundi.Design of Copper and γ-Alumina Reinforced Recycled Aluminium Matrix Composites through Sintering + Forging, Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.73-80, 2021, ⟨10.1007/978-3-030-59868-6_11⟩
  3. F. GatamortaH. EnginsoyEmin BayraktarI. MiskiogluD. KatundiDesign of Recycled Alumix-123 Based Composites Reinforced with γ-Al2O3 through Combined Method ; Sinter + Forging Mechanics of Composite, Hybrid and Multifunctional Materials Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.9-17, 2021, ⟨10.1007/978-3-030-59868-6_3⟩
  4. H. EnginsoyF. GatamortaEmin BayraktarI. MiskiogluA. LarbiDesign of Copper and Silicon Carbide (SiC) Reinforced Recycled Aluminium Matrix Composites Through Sintering + Forging, Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.45-52, 2021, ⟨10.1007/978-3-030-59868-6_7⟩
  5. Emin BayraktarD. KatundiF. GatamortaI. MiskiogluH. Murat EnginsoyDesign of Recycled Thin Sheet “Ti-Al” Based Composites Reinforced with AA1050, Boron, TiB2, TiC, and B4C Through Hot-Forged Bonding, Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.65-71, 2021, ⟨10.1007/978-3-030-59868-6_10⟩
  6. R. MoraesJ. PaschoalEmin BayraktarR. SilvaR. Costa et al. Study of a Semisolid Processing Route for Producing an AlSiMg0.5Mn Matrix Syntactic Foam via Thixoinfiltration of Fly Ash Micro Balloons Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.107-113, 2021, ⟨10.1007/978-3-030-59868-6_16⟩
  7. H. EnginsoyEmin BayraktarI. MiskiogluD. KatundiManufacturing of “Ni-Ti” Based Composites from Fresh Scrap Thin Sheets Reinforced with Nb and TiB2 Through Hot-Forged Bonding : Sandwich Structures
  8. Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.53-59, 2021, ⟨10.1007/978-3-030-59868-6_8⟩
  9. L. MihlyuzovaH. EnginsoyD. DontchevEmin Bayraktar. Tailored Behaviour of Scrap Copper Matrix Composites Reinforced with Zinc and Aluminium : Low Cost Shape Memory Structures, Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 6, SPRINGER, 2021,ISBN : 978-3-030-59868-6, http://link.springer.com/, pp.27-33, 2021, ⟨10.1007/978-3-030-59868-6_5⟩
  10. Ozgur AslanEmin Bayraktar. Analytical Solutions of Model Problems for Large-Deformation Micromorphic Approach to Gradient Plasticity, Applied Sciences, MDPI, 2021, ⟨10.3390/app11052361⟩
  11. Fathi MasoudS. SapuanMohd Khairol Anuar Mohd AriffinY. NukmanEmin BayraktarExperimental Analysis of Heat-Affected Zone (HAZ) in Laser Cutting of Sugar Palm Fiber Reinforced Unsaturated Polyester Composites, Polymers, MDPI, 2021, 13 (5), pp.706. ⟨10.3390/polym13050706⟩
  12. H. Murat EnginsoyEmin BayraktarDhurata KatundiIbrahim MiskiogluDetailed investigation of TiN effect on hybrid intermetallic composites manufactured by combined sinter + forging method, Mechanics of Advanced Materials and Structures, Taylor & Francis, 2021, pp.1-12. ⟨10.1080/15376494.2021.1886380⟩
  13. B. El AoudM. BoujelbeneA. BoudjemlineEmin BayraktarS. Ben Salem et al. Investigation of cut edge microstructure and surface roughness obtained by laser cutting of titanium alloy Ti-6Al-4V, Materials Today : Proceedings, Elsevier, 2021, ⟨10.1016/j.matpr.2020.12.756⟩
  14. M. BoujelbeneB. El AoudEmin BayraktarI. ElbadawiI. Chaudhry et al. Effect of cutting conditions on surface roughness of machined parts in CO2 laser cutting of pure titanium, Materials Today : Proceedings, Elsevier, 2021, ⟨10.1016/j.matpr.2020.12.179⟩
  15. Ozgur AslanEmin BayraktarA Large-Deformation Gradient Damage Model for Single Crystals Based on Microdamage Theory, Applied Sciences, MDPI, 2020, 10 (24), pp.9142. ⟨10.3390/app10249142⟩
  16. D. Katundi, I. Miskioglu, and E. Bayraktar, Design of Intermetallic Mg (Recycled Ti-Al) Based Composites Through Semi Powder Metallurgy Method, , https://doi.org/10.1007/978-3-030-30028-9_4, pp.27-34, 2020, ⟨10.1007/978-3-030-30028-9_4⟩
  17. E. Bayraktar, I. Miskioglu, D. Katundi, and F. Gatamorta, Manufacturing of Recycled Aluminum Matrix Composites Reinforced of TiC/MoS2/Al2O3 Fiber Through Combined Method : Sintered + Forging, Springer, Chapter 3, pp. 15-25, 2019, https://doi.org/10.1007/978-3-030-30028-9_3, pp.15-25, 2020, ⟨10.1007/978-3-030-30028-9_3⟩
  18. Emin BayraktarTao GaoZhidan SunHongqian XueZhi Qin et al. Effect of Turning on the Surface Integrity and Fatigue Life of a TC11 Alloy in Very High Cycle Fatigue Regime, Metals, MDPI, 2020, 10 (11), pp.1507. ⟨10.3390/met10111507⟩
  19. Sonia EzeddiniMohamed BoujelbeneEmin BayraktarSahbi Ben Salem. Optimization of the Surface Roughness Parameters of Ti–Al Intermetallic Based Composite Machined by Wire Electrical Discharge Machining, Coatings, MDPI, 2020, 10 (9), pp.900. ⟨10.3390/coatings10090900⟩
  20. A. Boudjemline, M. Boujelbene, Emin Bayraktar. Surface Quality of Ti-6Al-4V Titanium Alloy Parts Machined by Laser Cutting, Engineering technology and Applied science research , Dionisios Pylarinos, 2020, 10 (4), pp.6062-6067. ⟨10.48084/etasr.3719⟩
  21. H.M. EnginsoyEmin BayraktarD. KatundiF. GatamortaI. Miskioglu. Comprehensive analysis and manufacture of recycled aluminum based hybrid metal matrix composites through the combined method ; sintering and sintering + forging. Composites Part B : Engineering, Elsevier, 2020, 194, pp.108040. ⟨10.1016/j.compositesb.2020.108040⟩
  22. Fathi MasoudS.M. SapuanMohd Khairol Anuar Mohd AriffinY. NukmanEmin Bayraktar.
  23. Cutting Processes of Natural Fiber-Reinforced Polymer Composites, Polymers, MDPI, 2020, 12 (6), pp.1332. ⟨10.3390/polym12061332⟩
  24. Anheng WangHongqian XueEmin BayraktarYanli YangShah Saud et al. Analysis and Control of Twist Defects of Aluminum Profiles with Large Z-Section in Roll Bending Process, Metals, MDPI, 2020, 10 (1), pp.31. ⟨10.3390/met10010031⟩
  25. Artur CzupryńskiMarcin AdamiakEmin BayraktarBernard Wyględacz. Comparison of tribological properties and structure of coatings produced in powder flame spraying process on grey cast iron, Welding Technology Review, 2020, 92 (3), pp.7-21. ⟨10.26628/wtr.v92i3.1102⟩
  26. Alaeddin Burak IrezEmin Bayraktar. Design of Epoxy Modified Recycled Rubber-Based Composites : Effects of Different Contents of Nano-Silica, Alumina and Graphene Nanoplatelets Modification on the Toughening Behavior, Gazi University, Journal of Science, 2020, 33 (1), pp.188-199. ⟨10.35378/gujs.585446⟩
  27. Emin BayraktarAlaeddin Burak IrezIbrahim Miskioglu. Fracture Toughness Analysis of Epoxy-Recycled Rubber-Based Composite Reinforced with Graphene Nanoplatelets for Structural Applications in Automotive and Aeronautics, Polymers, MDPI, 2020, 12 (2), pp.448. ⟨10.3390/polym12020448⟩
  28. F. Gatamorta, Dhurata Katundi, E. Bayraktar, L. M. P. Ferreira, and M. L. N. M. Melo, Magnetic Shape Memory Composite (MSMC) Design from Intermetallic Cu-NiTi-MnAl-Fe3O4 Alloy as an Alternative Replacement for Actuators, Springer, Chapter 7, pp. 47-53, 2019, https://doi.org/10.1007/978-3-030-30028-9_7,
  29. A. Burak Irez, Emin Bayraktar Design of a Low-Cost Aircraft Structural Material Based on Epoxy : Recycled Rubber Composites Modified with Multifunctional Nano Particles, Mechanics of Composite and Multi-functional Materials, Volume 5,, pp.73-80, ⟨10.1007/978-3-030-30028-9_11⟩
  30. Emin BayraktarDhurata KatundiFábio GatamortaIbrahim Miskioglu. Design of Hydroxyapatite/Magnetite (Hap/Fe3O4) Based Composites Reinforced with ZnO and MgO for Biomedical Applications, Biomedical Journal of Scientific and Technical Research, Vol. 21, Issue 2, pp. 15790-15797, 2019 https://doi.org/10.26717/BJSTR.2019.21.003585
  31. E. Bayraktar, and M. L. N. M. Mel, Recycling of Aluminium-431 by High Energy Milling Reinforced with TiC-Mo-Cu for New Composites in Connection Applications, Chapter 6, pp.41-46, 2019, Springer,, https://doi.org/10.1007/978-3-030-30028-9_6, In press, ⟨10.1007/978-3-030-30028-9_6⟩
  32. G. Katundi, D. Katundi, E. Bayraktar, and I. Miskioglu, Alternative Composite Design from Recycled Aluminum (AA7075) Chips for Knuckle Applications-II, Springer, Chapter 2, pp. 9-14, 2019, pp.9-14, ⟨10.1007/978-3-030-30028-9_2⟩
  33. A. Burak Irez, Georges ZambelisEmin Bayraktar. A New Design of Recycled Ethylene Propylene Diene Monomer Rubber Modified Epoxy Based Composites Reinforced with Alumina Fiber : Fracture Behavior and Damage Analyses. Materials, MDPI, 2019, 12 (17), pp.2729. ⟨10.3390/ma12172729⟩
  34. Claudiney MendonçaPatricia CapellatoEmin BayraktarFábio GatamortaJosé Gomes et al. Recycling Chips of Stainless Steel Using a Full Factorial Design, Metals, MDPI, 2019, 9 (8), pp.842. ⟨10.3390/met9080842⟩
  35. H. Murat. EnginsoyF. GatamortaEmin BayraktarM.H. RobertI. MiskiogluExperimental and numerical study of Al-Nb2Al composites via associated procedure of powder metallurgy and Thixoforming, Composites Part B : Engineering, Elsevier, 2019, 162, pp.397-410. ⟨10.1016/j.compositesb.2018.12.138⟩
  36. A. Burak Irez, Emin Bayraktar, Ibrahim Miskioglu. Flexural fatigue damage analyses of recycled rubber - modified epoxy-based composites reinforced with alumina fibres, Fatigue & Fracture of Engineering Materials & Structures, Wiley-Blackwell, 2019, volume 42, issue 4, pp. 959-971 https ://doi.org/10.1111/ffe.12964
  37. Emin BayraktarHalil EnginsoyAli Kurşun. A Comprehensive Study on the Deformation Behavior of Hadfield Steel Sheets Subjected to the Drop Weight Test : Experimental Study and Finite Element Modeling, Metals, MDPI, 2018, 8 (9), ⟨10.3390/met8090734⟩
  38. A. Burak IrezEmin BayraktarI. Miskioglu, Recycled and devulcanized rubber modified epoxy-based composites reinforced with nano-magnetic iron oxide, Fe3O4, Composites Part B : Engineering, Elsevier, 2018, 148, pp.1-13. ⟨10.1016/j.compositesb.2018.04.047⟩
  39. Emin BayraktarFábio GatamortaMaria Helena RobertMETHOD FOR OBTAINNING METALLIC CELULAR MATERIALS, National Patent, Brazil, 2018 Patent n° : BR1020180118080.
  40. A. IrezI. MiskiogluEmin BayraktarDesign of Cost Effective Epoxy + Scrap Rubber Based Composites Reinforced with Titanium Dioxide and Alumina Fibers, Mechanics of Composite, Hybrid and multifunctional Materials, volume 5, pp.59-66, 2018 https://doi.org/10.1007/978-3-319-95510-0_7
  41. M. DouiriM. BoujelbeneEmin BayraktarS. Ben SalemA Study of the Surface Integrity of Titanium Alloy Ti-6Al-4V in the Abrasive Water Jet Machining Process, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.221-228, 2018 https://doi.org/10.1007/978-3-319-95510-0_27
  42. Rodolfo LeibholzHenrique LeibholzEmin BayraktarMaria Helena RobertInvestigation on Microstructure and Interfaces in Graded FE50007 / WC Composites Produced by Casting, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.321-329, 2018 https://doi.org/10.1007/978-3-319-95510-0_43
  43. Sonia Ezeddini, Mohamed Boujelbene, Emin Bayraktar, Sahbi Ben SalemRecycled Ti-17 Based Composite Design ; Optimization Process Parameters in Wire Cut Electrical Discharge Machining (WEDM), Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.109-125, 2018 https://doi.org/10.1007/978-3-319-95510-0_14
  44. A. IrezEmin BayraktarI. MiskiogluDamping and Toughening Effect of the Reinforcements on the Epoxy Modified Recycled + Devulcanized Rubber Based Composites, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.147-158, 2018 https://doi.org/10.1007/978-3-319-95510-0_17
  45. B. El AoudM. BoujelbeneEmin BayraktarS. Ben SalemA. Boudjemline Experimental Comparison of the Microstructure and Surface Roughness in CO2 Laser Cutting of the Titanium Alloy Ti–6Al–4V and the Pure Titanium Ti, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.249-255, 2018 https://doi.org/10.1007/978-3-319-95510-0_31
  46. A. Burak Irez, Ibrahim Miskioglu, Emin BayraktarToughening Mechanisms on Recycled Rubber Modified Epoxy Based Composites Reinforced with Alumina Fibers, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.275-282, 2018 https://doi.org/10.1007/978-3-319-95510-0_34
  47. S. EzeddiniEmin BayraktarM. BoujelbeneS. Ben SalemOptimization of Surface Integrity of Titanium-Aluminum Intermetallic Composite Machined by Wire EDM, Mechanics of Composite, Hybrid and multifunctional Materials, volume 5, pp.47-57, 2018 https://doi.org/10.1007/978-3-319-95510-0_6
  48. B. El AoudM. BoujelbeneEmin BayraktarS. Ben SalemOptimization of Kerf Quality During CO2 Laser Cutting of Titanium Alloy Sheet Ti-6Al-4V and Pure Titanium Ti, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.213-219, 2018 https://doi.org/10.1007/978-3-319-95510-0_26
  49. L-M. FerreiraEmin BayraktarI. MiskiogluM-H. RobertDesign of Magnetic Aluminum (AA356) Composites (AMCs) Reinforced with Nano Fe3O4, and Recycled Nickel : Copper Particles, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.93-100, 2018 https://doi.org/10.1007/978-3-319-95510-0_12
  50. L.-M. FerreiraI. MiskiogluEmin BayraktarD. KatundiReinforcement Effect of Nano Fe3O4 and Nb2Al on the Mechanical and Physical Properties of Cu-Al Based Composites, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.101-108, 2018 https://doi.org/10.1007/978-3-319-95510-0_13
  51. A. Burak IrezEmin BayraktarI. MiskiogluToughening Mechanism in Epoxy Resin Modified Recycled Rubber Based Composites Reinforced with Gamma-Alumina, Graphene and CNT, Mechanics of Composite, Hybrid and multifunctional Materials, volume 5, pp.31-39, 2018 https://doi.org/10.1007/978-3-319-95510-0_4
  52. D. KatundiA. IrezEmin BayraktarI. MiskiogluAlternative Composite Design from Recycled Aluminum Chips for Mechanical Pin-Joint (Knuckle) Applications, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.127-135, 2018 https://doi.org/10.1007/978-3-319-95510-0_15
  53. A. Burak IrezI. MiskiogluEmin BayraktarToughening Mechanisms on Recycled Rubber Modified Epoxy Based Composites Reinforced with Graphene Nanoplatelets, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.283-290, 2018 https://doi.org/10.1007/978-3-319-95510-0_35
  54. Georges ZambelisEmin BayraktarD. KatundiI. MiskiogluManufacturing of Copper Based Composites Reinforced with Ceramics and Hard Intermetallics for Applications of Electric Motor Repair Parts, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.137-145, 2018 https://doi.org/10.1007/978-3-319-95510-0_16
  55. A. Burak Irez, Emin Bayraktar, I. MiskiogluReinforcement of Recycled Rubber Based Composite with Nano-Silica and Graphene Hybrid Fillers, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, volume 5, pp.67-76, 2018 https://doi.org/10.1007/978-3-319-95510-0_8
  56. Fabio GatamortaC. MendonçaM. JunqueiraEmin BayraktarB. Andrade et al. Optimization of the High Energy Milling Process of Chips of a Stainless Steel Using the Response Surface Modeling, Mechanics of Composite, Hybrid and multifunctional Materials, Springer, Volume 5, pp.237-242, 2018 https://doi.org/10.1007/978-3-319-95510-0_29
  57. Emin BayraktarL.-M.-P. FerreiraI. MiskiogluM.-H. Robert. New magnetic aluminum matrix composites (Al-Zn-Si) reinforced with nano magnetic Fe 3 O 4 for aeronautical applications, Advances in Materials and Processing Technologies, 2018, 4 (3), pp.358 - 369. ⟨10.1080/2374068X.2018.1432940⟩
  58. A. Burak IrezEmin BayraktarI. Miskioglu. Devulcanized Rubber Based Composite Design Reinforced with Nano Silica, Graphene Nano Platelets (GnPs) and Epoxy for “Aircraft Wing Spar” to Withstand Bending Moment, Mechanics of Composite, Hybrid and Multifunctional Materials, Volume 5, pp.9-22, 2018 https://doi.org/10.1007/978-3-319-95510-0_2
  59. A. Burak IrezEmin BayraktarIbrahim Miskioglu. Toughening Mechanisms of Devulcanized Rubber Modified Epoxy Based Composites Reinforced with Zirconia, Reference Module in Materials Science and Materials Engineering, Elsevier, 2018, ⟨10.1016/B978-0-12-803581-8.11329-3⟩
  60. Diana ZaimovaEmin BayraktarIbrahim Miskioglu. Multifunctional Energetic Structural Composites : Epoxy-Rubber Matrix with Nickel Aluminum Reinforcements, Reference Module in Materials Science and Materials Engineering, Elsevier, 2018, ⟨10.1016/B978-0-12-803581-8.09608-9⟩
  61. A. Burak IrezEmin BayraktarIbrahim MiskiogluA New Design of Epoxy Based Composites Reinforced With Devulcanized Rubber, Alumina Fiber and BN, Reference Module in Materials Science and Materials Engineering, Elsevier, 2018 10.1016/B978-0-12-803581-8.11328-1
  62. H. Ali. Alhas, Emin Bayraktar. Manufacturing and Process Excellence by Embedding of Radio Frequency Identification (RFID) Tag in the Production of Composite Parts in Aeronautical Engineering, Reference Module in Materials Science and Materials Engineering, 2018 <10.1016/B978-0-12-803581-8.09609-0>
  63. A. Burak Irez, Emin Bayraktar, Jenny Hay, Ibrahim Miskioglu. Scrap-Rubber Based Composites Reinforced with Boron and Alumina, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 1-9, 2017, DOI 10.1007/978-3-319-63408-1
  64. S. Ezeddini, G. Zambelis, E. Bayraktar, I. Miskioglu, and D. Katundi Experimental Study of Laser Cutting Process of Titanium Aluminium (Ti-Al) Based Composites Designed Through Combined Method of Powder Metallurgy and Thixoforming, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 21-32, 2017, DOI 10.1007/978-3-319-63408-3,
  65. A.B. Irez, I. Miskioglu, and E. Bayraktar Mechanical Characterization of Epoxy : Scrap Rubber Based Composites Reinforced with Nanoparticles, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 33-44, 2017, DOI 10.1007/978-3-319-63408-4,
  66. A.B. Irez, I. Miskioglu, and E. Bayraktar Mechanical Characterization of Epoxy – Scrap Rubber Based Composites Reinforced with Nano Graphene, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 45-58, 2017, DOI 10.1007/978-3-319-63408-5
  67. A.B. Irez, E. Bayraktar, and I. Miskioglu. Mechanical Characterization of Epoxy – Scrap Rubber Based Composites Reinforced with Alumina Fibres, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 59-70, 2017, DOI 10.1007/978-3-319-63408-6,
  68. D. Katundi, L.P. Ferreira, E. Bayraktar, I. Miskioglu, and M.H. Robert. Design of Magnetic Aluminium (A356) Based Composites through Combined 2 Method of Sinter + Forging, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 89-100, 2017, DOI 10.1007/978-3-319-63408-9
  69. F. Gatamorta, E. Bayraktar, I. Miskioglu, D. Katundi, and M.H. Robert Design of Low Composites from Recycled Copper + Aluminium Chips for Tribological Applications, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 101-110, 2017, DOI 10.1007/978-3-319-63408-10
  70. Sonia Ezeddini, D. Katundi, Emin Bayraktar, and I. Miskioglu. Laser Cutting of the TiN +Al2O3 Reinforced Aluminium Matrix Composites through Semisolid Sintering, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 115-130, 2017, DOI 10.1007/978-3-319-63408-12
  71. Sonia Ezeddini, Emin Bayraktar, I. Miskioglu, and D. Katundi. Optimization of Laser Cutting Parameters for Tailored Behaviour of Scrap (Ti6242 + Ti) Based Composites through Semisolid Sintering, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 131-142, 2017, DOI 10.1007/978-3-319-63408-13
  72. B. El Aoud, M. Boujelbene, E. Bayraktar, S. Ben Salem, and I. Miskioglu. Studying Effect of CO2 Laser Cutting Parameters of Titanium Alloy on Heat Affected Zone and Kerf Width Using the Taguchi Method, Mechanics of Composite and Multi-functional Materials, Springer Volume 6, pp. 143-150, 2017, DOI 10.1007/978-3-319-63408-14
  73. M. BoujelbeneA. AlghamdiI. MiraouiEmin BayraktarM. Gazbar. Effects of the laser cutting parameters on the micro-hardness and on the heat affected zone of the mi-hardened steel, International Journal of Advanced and Applied Science, volume 4 (5), pp.19 - 25. 2017, ⟨10.21833/ijaas.2017.05.003⟩
  74. A. Burak Irez, Emin Bayraktar, I. Miskioglu. Design and Mechanical-Physical Properties of Epoxy-Rubber Based Composites Reinforced with Nanoparticles, Procedia Engineering, Elsevier, 2017, 184, pp.486 - 496. ⟨10.1016/j.proeng.2017.04.119⟩
  75. Emin BayraktarD. KatundiL.-M. FerreiraM.-H. RobertDesign and microstructural evolution, mechanical and physical properties of fine particles reinforced aluminum matrix composites
  76. Advances in Materials and Processing Technologies, volume 2 (4), pp.566 – 577, 2016 ⟨10.1080/2374068X.2016.1247244⟩
  77. Marina Ferraz VianaMaria Helena RobertEmin Bayraktar. Structure analysis of graded AA2011–Al2O3/NaAlSi3O8 composites produced by Thixoforming Advances in Materials and Processing Technologies, volume 3, pp.231-239. 2016, ⟨10.1080/2374068X.2016.1259803⟩
  78. Emin Bayraktar, Lygia. FerreiraIbrahim Miskioglu, Maria Helena. Robert. Influence of nanoparticulate and fiber reinforcements on the wear response of multiferroic composites processed by powder metallurgy Advances in Materials and Processing Technologies, 2016, 3 (1), pp.23 – 32, 2016 ⟨10.1080/2374068X.2016.1247242⟩
  79. Emin Bayraktar, Lygia Ferreira, Ibrahim Miskioglu, Maria Helena Robert. Design and physical properties of multifunctional structural composites reinforced with nanoparticles for aeronautical applications, Advances in Materials and Processing Technologies, 2016, 3 (1), pp.33 – 44, 2016 ⟨10.1080/2374068X.2016.1247243⟩
  80. Rodolfo LeibholzMaria Helena RobertHenrique LeibholzEmin Bayraktar. Development of Functionally Graded Nodular Cast Iron Reinforced with Recycled WC Particles
  81. Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.241-249, 2016, ⟨10.1007/978-3-319-41766-0_29⟩
  82. Lygia M.P. Ferreira, Ibrahim Miskioglu, Emin Bayraktar, and Dhurata Katundi. Mechanical and Tribological Properties of Scrap Rubber Based Composites Reinforced with Glass Fiber, Al and TiO2, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.1-8, 2016, ⟨10.1007/978-3-319-41766-0_29⟩
  83. L.F.P. Ferreira, E. Bayraktar, M.H. Robert, and I. Miskioglu. Recycling of Scrap Aluminum (AA7075) Chips for Low Cost Composites, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.19-26, 2016, ⟨10.1007/978-3-319-41766-0_3⟩
  84. D. Zaimova, L.-M.P. Ferreira, E. Bayraktar, and I. Miskioglu. Scrap Rubber Based Composites Reinforced with Ceramic Oxides and Silica, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.27-36, 2016, ⟨10.1007/978-3-319-41766-0_29⟩
  85. L.M.P. Ferreira, I. Miskioglu, E. Bayraktar, and D. Katundi. Mechanical and Tribological Properties of Scrap Rubber Reinforced with Al2O3 Fiber, Aluminum and TiO2, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.37-44, 2016, ⟨10.1007/978-3-319-41766-0_29⟩
  86. L.F.P. Ferreira, E. Bayraktar, I. Miskioglu, and D. Katundi. Design of Hybrid Composites from Scrap Aluminum Bronze Chips, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.131-138, 2016, ⟨10.1007/978-3-319-41766-0_15⟩
  87. L.F.P. Ferreira, E. Bayraktar, M.H. Robert, and I. Miskioglu. Particles Reinforced Scrap Aluminum Based Composites by Combined Processing Sintering þ Thixoforging, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.145-152-, 2016, ⟨10.1007/978-3-319-41766-0_17⟩
  88. L.F.P. Ferreira, E. Bayraktar, I. Miskioglu, and M.H. Robert. Recycle of Aluminum (A356) for Processing of New Composites Reinforced with Magnetic Nano Iron Oxide and Molybdenum, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.153-162, 2016, ⟨10.1007/978-3-319-41766-0_18⟩
  89. A. Kurşun, L.F.P. Ferreira, E. Bayraktar, and I. Miskioglu. Design of Hybrid Composites from Scrap Aluminum Reinforced with (SiC+TiO2+Gr+Ti+B) Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.225-232, 2016, ⟨10.1007/978-3-319-41766-0_27⟩
  90. L.F.P Ferreira, F. Gatamorta, E. Bayraktar, and M.H. Robert. Manufacturing of Low Cost Composites with Porous Structures from Scrap Aluminum (AA2014) Chips, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.233-240, 2016, ⟨10.1007/978-3-319-41766-0_28⟩
  91. L.F.P. Ferreira, I. Miskioglu, E. Bayraktar, and M.H. Robert. Aluminum Matrix Composites Reinforced by Nano Fe3O4 Doped with TiO2 by Thermomechanical Process, Mechanics of Composite and Multi-functional Materials, Springer volume 7, pp.251-260, 2016, ⟨10.1007/978-3-319-41766-0_30⟩
  92. Emin BayraktarD. ZaimovaI. Miskioglu. Design and manufacturing of new elastomeric composites : Mechanical properties, chemical and physical analysis, Composites Part B : Engineering, Elsevier, volume 105, pp.203 – 210, 2016. ⟨10.1016/j.compositesb.2016.05.061⟩
  93. Emin Bayraktar, Lygia M-P. Ferreira, Maria Helena Robert. Magnetic and electrical properties of aluminum matrix composite reinforced with magnetic nano iron oxide (Fe3O4), Advances in Materials and Processing Technologies, 2016, 2 (1), pp.165 - 173. ⟨10.1080/2374068X.2016.1164529⟩
  94. Emin BayraktarA. KurşunM. Robert. Low cost manufacturing of aluminum-alumina composites, Advances in Materials and Processing Technologies, volume 1 (3-4), pp.515 – 528, 2016. ⟨10.1080/2374068X.2016.1143212⟩
  95. Emin Bayraktar, Ali Kurşun, Halil Enginsoy. Experimental and numerical study of alumina reinforced aluminum matrix composites : Processing, microstructural aspects and properties, Composites Part B : Engineering, Elsevier, 2016, 90, pp.302 – 314, 2016 ⟨10.1016/j.compositesb.2016.01.006⟩
  96. Imed MiraouiMohamed BoujelbeneEmin Bayraktar. Analysis of cut surface quality of sheet metals obtained by laser machining : thermal effects Advances in Materials and Processing Technologies, volume 1 (3-4), pp.633-642, 2016. ⟨10.1080/2374068X.2016.1147759⟩
  97. Ali KurşunMehmet Şenel, Halil M. EnginsoyEmin Bayraktar. Effect of impact or shapes on the low velocity impact damage of sandwich composite plate : Experimental study and modelling, Composites Part B : Engineering, Elsevier, volume 86, pp.143 - 151. 2016 ⟨10.1016/j.compositesb.2015.09.032⟩